Jump to content

One happy newbie


All new to me
 Share

Recommended Posts

Hello all,
I went on a family vacation to the Outer Banks of North Carolina last week. My dad has been flying kites for as long as I can remember, and put me behind some handles around age 7. I rather liked it, but never pursued it fully. I kited sporadically for the next ten years, just dual line sport kites--bags and deltas. Eight years ago, my dad bought a Rev EXP but never even took it out of the bag. Recently, we pulled the kites out of the basement and brushed off the dust.

At the beach, we first struggled with line management, handle setup, and kite setup (spars in front or behind?). With the spars in front, I tried to get it off the ground. It was extremely difficult to control and I had never watched the training video, so the handles threw me off. We went inside and watched the video. It all clicked in my head, and I got the kite in the air after fixing our setup problems. It had me grinning endlessly once I understood how to move it. The amount of control, precision, and speed it has just blew my mind, even in the two days I got to fly it. The winds were relatively strong and constant, at least 10 miles an hour on both days (rather fast wind for a beginning Rev flyer), and the kite pulled me hard in the middle of the window.

My dad has since dictated it my kite because, despite his best efforts, he can't seem to get it in the air. To his credit, there were quick connect hooks on the lines, handles, and bridles, and the lines had never been equalized. Within two days of research, I understood what we needed to do to make it more precise and I finally understood the concept of a wind window. The sheer amount of kiting information on the internet is mind boggling! I removed the quick connects and equalized the lines and it added a little more precision. I managed to learn sideways hovers and reverse flight and hovers (though it's still a little testy). Mostly I fooled around with the speed, propellor spins, crazy acrobatics, and power control that these kites offer.

The last three days of the trip were rainy and unpleasant to kite in. So I researched more. When we arrived home, I machined some delrin bushings and pressed them into the ends of the handles (sans hooks) and cross drilled through them for a simple, long-lasting no-snag solution. I have some 175# bridle on the way to make adjustable leaders and can't wait to experiment with them. I understand that more brake will make the kite more controllable in reverse, and I want to actually hold a reverse hover.

Long story short, I am a Rev addict and I'm never turning back. Flying it just makes me laugh and smile; it entertains me far more than flying a two line.

I've watched videos featuring all of the Rev kites I can find, and really like the precision and smoothness that the Rev 1 offers. I'm eyeing a Sedgwick and also a B-series. I like the speed the 1.5 size offers, but I like the idea of the slowness of a Rev 1. I know I'll probably end up with a bag full of Revs, but which one should I go for after I've thrashed the EXP around a bunch? I'm leaning towards the familiar 1.5 size, plus the two frames just makes sense for a variety of wind conditions. I don't know if I'll be able to try any out locally, are there any Kentuckiana-area Rev flyers around?

Thanks to all who post here with valuable information, and thank you for reading.
All the best,
Thomas

  • Like 3
Link to comment
Share on other sites

Plenty of pilots in Chicago, and there should be quite a few around your area as well. Give it a bit and I am sure people will chime in. Congrats on your awesome time, Rev's can be oh-so addicting!!! As for the next one.....you may also want to take a look at Rev's New York Minute. That is one sweeeet machine.

Link to comment
Share on other sites

So great to read your post & feel your enthusiasm. Welcome to the Dark Side. I too have had a similar journey beginning about twenty months ago. My first attempt had some assembly issues, bridle was not attached. Tried for about an hour on my last day at beach with good wind but made little progress. Later, at home in December mountain conditions, I finally "got it" with two more hour long sessions of crashing a bit. My third Rev was a Rev 1 Sedgwick cool & it is still one of my favorites. It is a big beautiful kite flying elegantly in the sky. And that's a 1.5B mid-vent in my avatar picture, another wonderful kite. Ten Revs now & I still need just a couple more....

edit: Have changed my avatar several times. Here is the image mentioned above.

post-5097-0-19426700-1421369154_thumb.jpg & the ten Revs post-5097-0-45717500-1421369645_thumb.jpg

Link to comment
Share on other sites

Hi, and welcome to the dark side.

I live in Schaumburg (NW Chicago suburb) and will gladly fly with you. Put my number in your phone and call me whenever you plan to be in the Chicago area. You can reach me anytime at 224-227-0638.

P.S. -- Get on the IKE (Illinois Kite Enthusiasts) forum, ikeclub.org, if you haven't already. Lots of people there who will be happy to meet up and fly when you're in the area.

  • Like 1
Link to comment
Share on other sites

Hello all,

I went on a family vacation to the Outer Banks of North Carolina last week. My dad has been flying kites for as long as I can remember, and put me behind some handles around age 7. I rather liked it, but never pursued it fully. I kited sporadically for the next ten years, just dual line sport kites--bags and deltas. Eight years ago, my dad bought a Rev EXP but never even took it out of the bag. Recently, we pulled the kites out of the basement and brushed off the dust.

At the beach, we first struggled with line management, handle setup, and kite setup (spars in front or behind?). With the spars in front, I tried to get it off the ground. It was extremely difficult to control and I had never watched the training video, so the handles threw me off. We went inside and watched the video. It all clicked in my head, and I got the kite in the air after fixing our setup problems. It had me grinning endlessly once I understood how to move it. The amount of control, precision, and speed it has just blew my mind, even in the two days I got to fly it. The winds were relatively strong and constant, at least 10 miles an hour on both days (rather fast wind for a beginning Rev flyer), and the kite pulled me hard in the middle of the window.

My dad has since dictated it my kite because, despite his best efforts, he can't seem to get it in the air. To his credit, there were quick connect hooks on the lines, handles, and bridles, and the lines had never been equalized. Within two days of research, I understood what we needed to do to make it more precise and I finally understood the concept of a wind window. The sheer amount of kiting information on the internet is mind boggling! I removed the quick connects and equalized the lines and it added a little more precision. I managed to learn sideways hovers and reverse flight and hovers (though it's still a little testy). Mostly I fooled around with the speed, propellor spins, crazy acrobatics, and power control that these kites offer.

The last three days of the trip were rainy and unpleasant to kite in. So I researched more. When we arrived home, I machined some delrin bushings and pressed them into the ends of the handles (sans hooks) and cross drilled through them for a simple, long-lasting no-snag solution. I have some 175# bridle on the way to make adjustable leaders and can't wait to experiment with them. I understand that more brake will make the kite more controllable in reverse, and I want to actually hold a reverse hover.

Long story short, I am a Rev addict and I'm never turning back. Flying it just makes me laugh and smile; it entertains me far more than flying a two line.

I've watched videos featuring all of the Rev kites I can find, and really like the precision and smoothness that the Rev 1 offers. I'm eyeing a Sedgwick and also a B-series. I like the speed the 1.5 size offers, but I like the idea of the slowness of a Rev 1. I know I'll probably end up with a bag full of Revs, but which one should I go for after I've thrashed the EXP around a bunch? I'm leaning towards the familiar 1.5 size, plus the two frames just makes sense for a variety of wind conditions. I don't know if I'll be able to try any out locally, are there any Kentuckiana-area Rev flyers around?

Thanks to all who post here with valuable information, and thank you for reading.

All the best,

Thomas

HEY! Next time you're on the outer banks a visit to the Shook Palace is certainly in order. Two hard-core fliers who just happen to own a kite shop and make custom Masterpiece Revolution Kites, as well as stocking a variety of cool bits and mods to fit these wings. Cath and Eliot, Flying Smiles Kites, The Whalehead Club, Shook Mesh customs, . . . It's heaven for quad-heads,

Next time make sure you call first, confirm their availability, and finally share some flying time with these spectacular folks. So much better than stock is available if you have a credit card and a half a day. Or when you decide that your first loved Rev must be resurrected from the grave. Who U gonna' call for quality repairs on that kite?

Play pawnshop? They takes your unloved kites (MAYBE!, depending on condition) and you leave with other merchandise. THat bartering is half the fun!

  • Like 2
Link to comment
Share on other sites

From your description you vacation closer to the southern part of the outer banks. Which beach? I fly thee as often as I can and we have a network of Rev fliers. We would love to have you join in. Plenty of kites to try out including the New York Minutes. Come join the fun.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...