Jump to content
  • 0
Sign in to follow this  
REVflyer

quarter inch spars

Question

Does Revolution still create spars in the 1/4 inch format, even if only for a customized order of some decent size?

or is everything leftover from previous seasons in this size?  

And only larger diameter spars will available in the future, such as the formats that support Reflex tech (5/16") or SLE (7/16")?

Lastly:  Do the end-caps currently provided fit both sizes of tubes (1/4 and 5/16") on the RX or Classic Reflex models?

Share this post


Link to post
Share on other sites

2 answers to this question

Recommended Posts

  • 0
10 hours ago, REVflyer said:

Maybe you should just call Lolly.

Share this post


Link to post
Share on other sites
  • 0

The 1/4" spars are still being used for the Rev Classic, Rev 1, EXP models and for the Vertical rods on the Reflex.  There is no change in production and no plans that I have heard that they are going to be discontinued.  The new 5/16" spars for the Reflex XL and Reflex XX are for the leading edge of the Reflex and will not work with the older 1/4" caps. New caps are available for the Reflexr sized rods.  The SLE rod is still available as they are used in the leading edges of the Speed Series and Power Series Rev's

The 1/4" rods are still available in all wrap configurations as well. 2,3,4, Race and green Race.

The 1/4" caps will work with the standard 1/4" rods and the SLE rods because it fits over the 1/4" rod but inside the SLE rod (5/8").  The 1/4" caps will NOT fit inside the new Reflex 5/16" rods so they can't be used.

Hope that helps.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×